AF-Series Splitters

AF-Series Splitters
AF-Series Splitters
AF-Series Splitters
AF-Series Splitters
AF-Series Splitters
AF-Series Splitters
AF-Series Splitters
The AF-Series of splitters (Automatically Fed) are also simple, easy to operate, they are fully automatic feeding splitters that use a different configuration than other splitters in the market.
They are capable of up to 500 splits per hour. They use an encoder positioning system and they are capable of two-way and four-way splitting, and can split end products from 40 mm high up to 215 or 305 mm tall.
 
The AF-3 units use a single blade configuration that is easy to change, and a floating splitting roller table that is supported by air bags. Can use dual or single splitting blades. It uses two larger cylinders. Alternatively, the AF-4 units use a fixed splitting flat table (wear plate). It can
use dual or single splitting blades. It uses one very large hydraulic cylinder.
 
The hydraulic system uses an axial piston pump, and is low pressure. These units are rugged and weigh a whole three (3) metric tons because of their frame strength. They use a simple control panel and simple guided feeding of splitting products.
 
The hydraulic power unit (pump, oil tank, valve manifold and pump motor) is separate from the body of the splitter. It uses a bar conveyor pusher activated by and electric motor. The bar conveyor product pusher is activated by a hydraulic drive.
 
MODELS AF-3, AF-3BTO & AF-4

To download a high resolution specification sheet for this product, just fill out this simple form. The spec sheet download link will be emailed to you immediately. For quickest results, avoid using free email sites like Yahoo and Hotmail.






Splitters

Project details
Like it?
More sharing options

The AF-Series of splitters (Automatically Fed) are also simple, easy to operate, they are fully automatic feeding splitters that use a different configuration than other splitters in the market.